Switches Reduce Costs of Cable Installation

Description

AutomationDirect has added PoE+ switches to its unmanaged Ethernet switches lineup. Power over Ethernet (PoE) allows Ethernet network cables to also carry electrical power. Normally two connections are required, a network connection and a power connection. PoE reduces the time and expense of having electrical power cabling installed.

 

Two versions of Stride PoE+ switches are available: 10/100 Mbps and GbE. Both have one standard RJ45 Ethernet port and four PoE+ RJ45 ports (30W on each port). Using Powered Device (PD) Detection, the PoE switch port will detect the presence of a PoE enabled device before sending power. If a non-PoE device is detected, power will not be sourced on that port but Ethernet communications will be permitted.

 

Power input requirements are 54-58 VDC for PoE+ (30 watts per port) and 48-58 VDC for PoE (15.4 watts per port). The switches provide broadcast/network storm protection and have redundant power inputs.

 

With IP30 metal cases, these PoE switches have a wide -40 to +75°C (-40 to +167°F) operating temperature range and are approved for HazLoc environments. The switches are DIN rail mounted and an optional panel mounting bracket is available.

Specs

Features:

  • Full PoE+ on four ports (30W on each port)
  • Broadcast storm protection
  • Power input requirements: 54-58 VDC for PoE+; 48-58 VDC for PoE
  • Wide temperature range: -40 to +75°C (-40 to +167°F)
  • Optional panel mounting accessory (SE2-PM3)
  • Redundant power input
  • GbE model available
  • UL(cUL) listed, CE certified, and Haz Loc rated (C1D2)
  • IP30 metal cases
Be the first to review this product
Add your review:
RELATED STORIES