TiNox-Cut End Mills

Update 7/2021

Four new models have been added to the TiNox-Cut End Mills line: 5-Flute N, NF, Base, and Trochoidal tools.

5-Flute TiNox-Cut N: This coolant fed series features 5 flutes for high feed rates, a raised land that increases chip clearance, and is ALCR-coated. It is a high-performance tool designed for roughing and finishing, especially suitable for materials such as titanium and titanium alloys.

TiNox-Cut NF: This high-performance series features a fine chip breaker design that reduces chip size while reducing cutting forces. The tool features a proprietary TiN/TiALN coating in both coolant-fed and solid designs and is ideal for semi-finishing difficult materials such as nickel alloys.

TiNox-Cut Base: The Base design is a material-specific style tool with a proprietary TiN/TiALN coating for roughing and finishing and is ideal for stainless and acid-resistant steels.

TiNox-Cut Trochoidal: Ideal for high metal removal rates, this tool series features a newly developed geometry, a proprietary TiN/TiALN coating, and a chip breaker edge, which combined, reduces stress and vibration when machining difficult materials such as titanium and stainless steel. All tools are coolant-fed for maximum performance. Designed for trochoidal milling via the overlapping movement of circular paths, these tools can rough and finish mill over 30% faster than standard designs, while increasing tool life significantly.

TiNox-Cut N, NF, and Trochoidal End Mills are available in axial internal coolant-through capability for maximum chip evacuation and cooling ability. TiNox-Cut N and TiNox-Cut Trochoidal tools are available in both square-end and corner radius configurations. Weldon flat shank construction is available in both TiNox-Cut NF and TiNox-Cut Trochoidal tools and is compatible with Emuge FPC Milling Chucks featuring an anti-pullout pin lock system. Overall, the expanded line includes tools that are available in inch sizes ranging from ¼ to 1 in. in diameter, and in stub, standard, long, and extra-long lengths.

Emuge Corp. has introduced TiNox-Cut, a new series of end mills specifically developed to provide exceptional material removal rate and long tool life when machining today’s toughest materials. The Emuge-Franken TiNox-Cut End Mills offer a high-performance cutting solution for nickel alloys such as Inconel 718, Nimonic and Waspaloy, Titanium 6Al-4V, and tough steels like Stainless 316—materials used extensively in aerospace and other demanding industries. 

In addition, the tools are made from a special ultra-fine carbide grade to further maximize wear resistance. TiNox-Cut End Mills are well suited for both roughing and finishing operations. They are available with standard flat ends and optionally with a selection of corner radii. For even more efficient feed rates, metal removal rates and chip evacuation, TiNox-Cut 4 and 5-flute end mills feature internal coolant/lubricant capability. Offering superior machining repeatability and safety, the new end mills feature a tight, h11 shank tolerance and a notch in the shank for mechanical clamping. Emuge TiNox-Cut End Mills range in diameter from 1/4 to 1 in. and in metric sizes from 6 to 25 mm.