Class I, Div II Fluorescent Fixture - Corrosion Resistant (Saltwater) - 2' Fixture - Bi-Axial Design
Description
The Magnalight HALP-24-2L-BX Hazardous Area Fluorescent Light Fixture is U.S / Canada U.L approved Class 1 Division 2 Groups A, B, C and D - UL 1598A listed, has a T4A temperature rating and is specifically designed to handle the rigors of wet and corrosive marine environments. This fixture uses Bi-Axial design bulbs to increase wattage and light output without increasing fixture size or weight.
The HALP-24-2L-BX hazardous area fluorescent light fixture builds on the effectiveness of our HALP-24 series by including bi-axial lamps which raise the fixture's wattage and light output totals without increasing the unit's size or weight. Although some efficiency is sacrificed for increased output, this unit's lower cost and increased ouput helps offset this lower efficiency. This Class 1 Division 2 rated fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Corrosion resistant stainless steel latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. This fixture is UL 844 rated and Class 1 Division II, Groups A, B, C, D approved.
The HALP-24-2L-BX also carries a UL 1598A outdoor marine rating and meets US Coast Guard specifications. This fixture ideal for hazardous areas where corrosion resistance is mandatory a
Specs
HALP-24-2L-BX Hazardous Area | U.L. Ratings |
UL Listings: United States - Canada | Class 1 Division 2, Groups A, B, C, D |
Dimensions: W-8.25 " L-26 " H-7" | UL 844 |
Weight: 5 Lbs | UL 1598A Marine Type (Salt water) California Title 24 Compliant |
Total Watts: 80 watts* | |
Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz | |
Total Lumens: N/A | |
Lamp Life Expectancy: 20,000 Hours | |
Efficiency: N/A | |
Operating Temp Range: T4A Rated -30 C to 70 C Minimum Operating Temp: -30 C Maximum Case Temp: 90 C | |
Beam Angle: N/A | |
Color Temp: N/A | |
Mounting: Flange type stainless steel | |
Wiring Hub: 3/4 inch threaded | |
U.L Approval: U.S Certificate Canada Certificate | |
Meets US Coast Guard specifications. |