Appleton Contender LED Luminaire
Description
Raising the bar in lighting performance, operational efficiency, and employee safety, Emerson today launched the Appleton Contender LED, an extra low-profile enclosed and gasketed LED luminaire that brings energy and maintenance savings of up to 65% to challenging low clearance areas, such as walkways, catwalks, stairwells, and tunnels.
Designed specifically for retrofit applications, this cost-effective solution mounts directly to the hood of a competitor's High-Intensity Discharge (HID) hazardous location luminaire without an adapter, saving time and labor costs.
Oil & Gas facilities, chemical processors, and other hazardous locations place critical demands on luminaries, especially when it comes to extreme temperature ranges and long service lives. The Appleton Contender LED provides rated illumination through its full ambient operating temperature range of -40 to +149°F to make sure facilities are safely lit in arctic cold or when the going gets hot. In addition, it features a rated L70 lifetime of 100,000+ hours adding value while minimizing maintenance requirements.
To withstand particularly harsh areas the construction includes:
- a proprietary epoxy powder coat finish for unmatched corrosion resistance
- a rugged IP68 watertight hub to ensure water in the conduit is kept out of the luminaire, heavy industrial-grade gaskets
- high vibration and shock resistance
- plus a robust 6KV surge suppression circuit to protect against damaging transients.
With three-lumen output options and four interchangeable and field-replaceable globes options, this luminaire delivers the lighting equivalent of 70 to 175 W HID luminaires to provide a fully customized solution.
To ensure safe operation in areas where flammable gases or vapors may be present, the Appleton Contender LED is engineered to meet or exceed industry standards to assure workers in places such as offshore rigs, petrochemical, and chemical processing plants, water treatment plants, and grain elevators can work productively and comfortably. It is NEC/CEC certified for hazardous locations rated Class I, Division 2 and Class I, Zone 2, Class II, Division 1 and 2, Zone 21 and 22, and Class III, as well as NEMA Type 3R, 4, and 4X wet locations and is IP 66/67 and ABS certified.
Specs
| NEC/CEC Certifications and Compliances | Class I, Division 2, Groups A, B, C, D; Class I, Zone 2, Aex ec IIC; Class II, Division 1, Groups E, F, G; Zone 21, Aex tb IIIC; Class II, Division 2, Groups F, G; Class III; Type 3R, 4, 4X; IP66/67; Simultaneous Exposure; Suitable for Wet Locations; Marine Outside Type (Salt Water), American Bureau of Shipping (ABS) Certified |
|---|---|
| Lumens to Watts | 3,300 lm is equivalent to 70 to 100-W HID, 4,400 lm is equivalent to 100 to 150-W HID, 5,500 lm is equivalent to 150 to 175-W HID |
| Ambient Temperature | BU/BH: -40 to +65°C (-40 to +149°F) |
| Standard Materials | Cast copper-free (4/10 of 1% max.) aluminum luminaire body with stainless steel hardware. Polycarbonate or glass globe with stainless steel wire guard. Heat-resistant prismatic glass refractor with die-cast aluminum guard. Fiberglass reinforced white polyester reflector |
| Standard Finishes | Luminaire body and glass refractor guard have gray epoxy powder coat finish, electrostatically applied for complete uniform protection. |
| Wiring | Choice of terminal blocks or wire nuts to meet end-user preferences |
| Electrical | 120 to 277V AC, 50/60 Hz; 125 to 300V DC or 347-480V AC, 50/60 Hz |
| Options | Guard for glass globe and refractor available separately |
- Enclosed and gasketed fixtures suitable for use in a wide range of industrial, chemical processing, and other areas where flammable gases, vapors, and combustible dusts and fibers are present including simultaneous exposure
- Suitable for use in marine and wet locations
- Ideal for use in areas of low clearance, low ceiling heights or where fixture weights must be minimized
- Typical industries include pulp and paper mills, processing plants, chemical plants, petrochemical facilities, oil refineries, drilling rigs, foundries, waste treatment, mining, and steel mills
- Typical applications include walkways/catwalks, stairwells, grain elevators, tunnels, pipe racks, offshore rigs, vessel lighting, cooling towers, and processing areas
- Compact lightweight low profile design is suited for low mounting heights (less than 12 lb.)
- Customize to the application requirements with four different field-replaceable globe options: clear and diffused polycarbonate, clear glass, or prismatic glass refractor
- Three light output levels for retrofit of HID fixtures up to 175 W
- Standard 6 kV surge protection
- Luminaire comes pre-wired with 12 in. of 14 AWG SOOW cables protruding from the IP68 watertight NPT hub at the top of the luminaire lid