AZM40 Solenoid Interlock
Description
The AZM40 is a small electronic solenoid interlock with dimensions of just 119.5 x 40 x 20 mm. It was designed to fit standard extruded profiles typically used in machine guard frames. It features a symmetrical housing and actuator approach of 180-deg., offering mounting flexibility on hinged or sliding guards which do not close at 90-deg. or those that open upwards to a 45-deg. angle.
The solenoid is strong for its size, offering 2,000 N locking force, and 40 N latching. Also, there is an integrated RFID sensor, which offers the option of individually coding the actuators for enhanced tamper resistance. Models are available for guard locking or process protection applications. Several LED status indicators are visible from three sides and make troubleshooting easier with flashing diagnostic codes. The internal monitoring means that this interlock meets the highest safety levels of PLe to ISO 13849 or SIL 3 to IEC 61508.
Specs
- Compact, flat design
- 119.5 x 40 x 20 mm
- High holding force 2000
- Latching force 40 N
- RFID-technology for needs-based protection against tampering
- Individually coded version with coding level "High" according to ISO 14119
- Only one version for hinged and sliding doors
- Actuator can approach interlock continuously within a 180-deg. angle.
- Symmetrical mounting; can be bolted on either side