Devcon DFense Blok Wearing Compounds

Description

Devcon DFense Blok wearing compound is specially formulated to outperform and outlast traditional epoxy wear and abrasion products—even in the most severe impact and sliding abrasion conditions. DFense Blok is an innovative alumina ceramic bead-filled epoxy compound that, when used with DFense Blok Surface Wetting Agent, drastically increases drop impact strength over 1-in. ceramic tile.

 

Abrasion resistance is significantly better than traditional epoxy products. DFense Blok Surface Wetting Agent is a 2-part thixotropic epoxy gel system that improves the ease of application and cured adhesion properties of DFense Blok wearing compound.

 

DFense Blok is ideal for use in repairing, rebuilding, and protecting typical wear and abrasion applications such as pipe elbows, scrubbers, ash handling systems, cyclones, fan blades, pump boxes, float cells, screw conveyors and augers, etc. In areas that cannot be welded or where sufficient surface preparation cannot be performed, it is recommended to first apply a coat of DFense Blok Surface Wetting Agent. DFense Blok can also be used in place of abrasion-resistant metal and ceramic tile.

 

Available in 30-lb. pails, DFense Blok is mixed in a 2:1 ratio and has a working time of 25 minutes at room temperature. A non-sagging compound, it can be easily applied by trowel at thicknesses of 3/4-in. on vertical surfaces and 1/2-in. on overhead surfaces. It achieves functional cure in only 4 to 5 hours, allowing equipment to be returned to service in hours, not days. It has superior wear and abrasion resistance, withstands high-impact conditions, and withstands service temperatures up to 300°F. 

 

Using DFense Blok Surface Wetting Agent significantly improves the adhesion of DFense Blok compared to traditional epoxy products (per ASTM D 1002). Once it has been applied, there is no wait time before applying DFense Blok wearing compound. DFense Blok Surface Wetting Agent’s orange color ensures complete surface coverage and facilitates visual inspection. A single 1-lb. kit provides enough surface coverage for 30 lb. of DFense Blok.

Specs

  • DFense Block
    • 4X better abrasion resistance than the competition
    • 7X better drop impact strength than ceramic tile
    • Superior sliding abrasion resistance
    • Withstands high impact conditions
    • Less prone to unexpected fractures
    • Non-sag in Vertical and Overhead applications
    • Open Time: 25 Minutes
    • Gap Fill: .25 to 1.5 in.
    • Unit Size: 30 lb.
    • Functional Cure: 4 to 5 Hours
  • DFense Blok Surface Wetting Agent
    • Zero wait time before applying DFense Blok
    • Allows superior adhesion to vertical and overhead surfaces
    • Use in place of expanded metal
    • Orange color for easy visual inspection
    • Open Time: 25 Minutes
    • Color: Orange
Be the first to review this product
Add your review: