Photopolymers for Industrial 3D Printing Applications


The INFINAM TI 3100 L and INFINAM ST 6100 L Photopolymers for Industrial 3D Printing Applications are ready-to-use materials that mark the start of a new product line of polymer resins suitable for use in common VAT polymerization technologies such as SLA or DLP.


The first high-performance material from Evonik's photopolymer product family leads to high toughness and impact-resistant 3D parts. The combination of properties makes INFINAM TI 3100 L the new standard for additive manufacturing of industrial components using VAT polymerization technologies such as SLA and DLP. The impact resistance measured on printed components is 30 J/m3 with a high elongation at break of 120%. The new material can therefore withstand strong impact or permanent mechanical effects such as pressing or impact. The range of possible applications extends from industrial to automotive parts and individual applications in the consumer goods sector, which, in addition to design-free forms, require strong mechanical loads in object use. 


The INFINAM ST 6100 L is setting-up a new benchmark in the category of high strength polymer resins. It combines tensile strength of 89 MPa, flexural stress of 145 MPa, and HDT of 248°F (120°C), which fills the material gap in ultra-high strength photopolymers. These special properties make it the material of choice for applications which need high temperature resistance combined with high mechanical strength.



  • High toughness
  • High impact resistance
  • High mechanical resistence
  • Good processability


  • Durable & tough
  • High tensile strength combined with elongation
  • High temperature resistence
  • High green body strength
  • Very good weatherability
Be the first to review this product
Add your review: