Portable Plasma Cutters
Description
Snap-on Industrial’s line of Plasma Cutters can cut up to 3/4-in. thickness on a variety of ferrous, non-ferrous, and high-strength materials.
Plasma Cutters feature depth-of-cut adjustability, which allows the top layer of material to be cut without disturbing the base layer. Making these cuts possible is inverter technology that drives a small yet powerful package size allowing for portability out in the shop or on the job site.
Specs
| PLASMA20i | PLASMA30i | PLASMA60i | |
| Max. Output Amps | Adjustable 5-20 | Adjustable 5-25 | Adjustable 20-55 |
| Cut Thickness | 1/4 in. | 3/8 in. | 3/4 in. |
| Sever Thickness | 3/8 in. | 1/2 in. | |
| Primary Input (Volt AC) | 115 | 115 or 230 | 208/230 |
| Primary Input | 20 A | 30 A 115V or 20 A 230V | 40 A |
| Duty Cycle Rating | 100% at 15 A | 60% at 22 A | 60% at 40 A |
| Min. Compressed Air Requirements | 50 PSI at 5 CFM | 50 PSI at 7 CFM | 68 PSI at 7 CFM |
| Torch and Ground Cable Lengths | 12 ft | 18 ft | |
*Consumable kits are available for all three plasma cutters that include nozzle holders, nozzles, swirl rings, and electrodes.